明确结构调整重点 抓好区域规划布局四川水泥工业加速结构调整

四川省人民政府印发《关于加快我省水泥工业结构调整的意见》至2010年，四川省新型干法水泥达到20％以上。     

浅谈水利工程施工项目的成本控制

近几年,国家加大了对水利基础设施的投资规模,施工企业将面临新的机遇和挑战。加强工程项目成本管理,控制工程项目的成本开支,遏制工程项目的亏损,提高企业的经济效益和市场竞争力,已成为水利施     

Effect of silver addition on superconductivity in the Bi1.6Pb0.4Sr1.6Ca2Cu3O10−y system

Silver/superconductor composites containing 0 to 80 vol% silver have been prepared and their properties determined. Optimum heat treatment at sintering temperatures ( 800° C) under low oxygen pressures produces material with high critical current density and improves physical properties. Magnetic susceptibility measurements have been found to be consistent with resistivity results. In order to retain a single high-T _c phase with increasing silver content, decreased oxygen partial pressures are required. Using the normal-state resistivity of these composites, a percolation threshold at a silver volume fraction of 43% was observed, while zero resistivity measurements show that a continuous superconducting network can be obtained with up to 80 vol% silver. The critical current density of 21 vol% silver-doped samples was found to be 1520 A cm^–2 at 77.3 K, compared to 260 A cm^–2 for an undoped sample.     

Magnetic field dependence of the critical current density for the bismuth-based bulk high-Tc superconductors

Three types of bismuth-based bulk samples were prepared through uniaxial pressing at room temperature, hot isostatic pressing (HIP) and drawing and rolling. Transport current properties were characterized in a steady field up to 1.12 T at 77 K (T/T _c=0.75). The Josephson weak-link decoupling fields have been found to be 5 mT for the cold-pressed pellet and 30 mT for the HIPed pellet and the rolled tape. At the decoupling field the transport critical current density,J _c, drops 80% from 124 (OT) to 29 A cm^–2 (5 mT) for the cold-pressed pellet, 80% from 582 (OT) to 126 A cm^–2 (30 mT) for the HIPed sample and 50% from6500 (0 T) to 2850 A cm^–2 (30 mT) for the rolled tape. In the flux flow regime, whereB is perpendicular to thec-axis a modified Kim's modelJ _c=(/B ₀)/[(1+B/B ₀)] ⁿ can be used to describe the field dependence of the critical current density, J_c, in the field range 0.2–1.12 T. The effective upper critical fields were estimated to be 0.98, 1.54 and 1.94 T for the three types of samples, respectively. An adjustable range ofB _c2 for bismuth-based bulk highT _c superconductors is given. Flux shear may operate in these materials. The prediction of this pinning mechanism is yielded from fitting the equation qualitatively. WhenB is parallel to thec-axis, the absence of strongly intragranular flux-pinning is emphasized by the poor flux flow regime for the rolled tape sample.     

喷雾干燥法制备的Yb2O3(Al2O3)-8YSZ超细粉的性能

研究了用喷雾干燥法处理Yb2O3掺杂的氧化锆超细粉的性能。采用LS800型激光衍射粒度分析仪、JB-1型氮吸附比表面仪、Rigaku-DmaxⅡ型X射线衍射仪（XRD）和JSM-6700F型扫描电镜（SEM）分析了喷雾干燥法制备的Ybn（Al2O3）-8YSZ超细粉的粒度分布和比表面积，研究了粉末微观形貌特征。结果表明，制备的是球形颗粒、分散性好．晶粒尺寸均匀的超微细2％Yb2O3（Al2O3）-8YSZ（摩尔分数）粉末。     

β晶型成核剂改性聚丙烯纤维研究

研究了含 0 .2 5 %β晶型成核剂 (酰胺化合物 )的聚丙烯 Z3 0 S及其纤维的力学性能、晶型结构和微观形态。通过纺丝 -拉伸实验和力学性能测试、广角 X射线衍射分析、SEM观察 ,发现成核改性后生成了β晶型聚丙烯 (K值约为 75 .3 % ) ,抗冲性能大幅度提高。β晶型聚丙烯在纺丝卷绕过程中发生了β晶型→α晶型转变 ,纤维中产生约 10 %微孔隙 ,改性纤维的力学性能有所降低。     

Decolorization of reactive brilliant red X-3B by heterogeneous photo-Fenton reaction using an Fe–Ce bimetal catalyst

Decolorization of reactive brilliant red X-3B was studied by using an Fe–Ce oxide hydrate as the heterogeneous catalyst in the presence of H₂O₂ and UV. The decolorization rate was in the order of UV–Fe–Ce–H₂O₂ > UV–Fe³⁺–H₂O₂ > UV–H₂O₂ > UV–Fe–Ce ≥ Fe–Ce–H₂O₂ > Fe–Ce. Under the conditions of 34 mg l⁻¹ H₂O₂, 0.500 g l⁻¹ Fe–Ce, 36 W UV and pH 3.0, 100 mg l⁻¹ X-3B could be decolorized at efficiency of more than 99% within 30 min. The maximum dissolved Fe during the reaction was 1 mg l⁻¹. From the fact that the decolorization rate of the UV–Fe–Ce–H₂O₂ system was significantly higher than that of the UV–Fe³⁺–H₂O₂ system at Fe³⁺ = 1 mg l⁻¹, it is clear that the Fe–Ce functioned mainly as an efficient heterogeneous catalyst. UV–vis, its second derivative spectra, and ion chromatography (IC) were employed to investigate the degradation pathway. Fast degradation after adsorption of X-3B is the dominant mechanism in the heterogeneous catalytic oxidation system. The first degradation step is the breaking down of azo and CN bonds, resulting in the formation of the aniline- and phenol-like compounds. Then, the breaking down of the triazine structure occurred together with the transformation of naphthalene rings to multi-substituted benzene, and the cutting off of sulphonic groups from the naphthalene rings. The last step includes further decomposition of the aniline structure and partial mineralization of X-3B.     

驱油用聚丙烯酰胺溶液界面特性研究

使用 TRACKR全自动液滴界面张力仪测量了不同试验条件下十二烷 /聚丙烯酰胺溶液界面扩大、缩小时的流变特征及界面张力 ,开发出了用以表征液膜强度的界面黏弹性 E的测量方法。在十二烷 /聚丙烯酰胺界面形成稳定的过程中界面 (扩张 )黏弹模量不断增加 ,并逐渐达到恒定 ,其中弹性成分所占比例远大于黏性成分即 E′>E″。考察的聚合物浓度范围为 5 0～ 2 0 0 0 mg/ L ,界面黏弹模量从 1 7.6提高到 3 0 .6m N·m-1。放置 3 d后的聚合物溶液界面黏弹模量保留率为 82 .8%。实验结果表明聚合物浓度变化对界面张力影响不显著。     

非晶态化学镀Ni-Sn-P合金镀层变温晶化的研究

研究了非晶态Ni-Sn-P合金镀层的变温化过程,由实验得出Ni-Sn-P合金约在350℃开始晶化,450℃左右晶化结束,并测得Ni-Sn-P合金变温晶化激活能为233KJ·moL~(-1)。     

MgO－Al_2O_3－ZrO_2质耐火材料的显微结构分析

在方镁石－尖晶石－ＺｒＯ２－硅酸盐相结构中，发现由于ＺｒＯ２的存在，可提高主晶相方镁石与尖晶石的结构完整性。同时ＺｒＯ２又吸收并富集了大量的ＣａＯ成分，形成ＣａＺｒＯ３布于晶间，阻断硅酸盐相的扩散路径，封闭气孔．并有形成原位生长的含有ＣａＯ·ＺｒＯ２高粘弹基质相的趋势，在遇渣侵蚀时这种现象更为明显。